Home | Products | ADAMSON | S10


The S10 is a 2-way, full range line array cabinet containing 2x ND10-LM Kevlar® Neodymium drivers (2x 16 Ω) and an NH4TA2 1.5” exit compression driver (8 Ω). The critically optimized sound chamber produces a slightly curved wavefront with a nominal dispersion pattern of 110° x 10° (H x V). The chamber’s efficiency allows for increased vertical dispersion without sacrificing high frequency presence in the far field. Patent-pending Controlled Summation Technology further eliminates low-mid lobing normally associated with 2-way line source systems.


2 x 10" Kevlar® Neodymium Driver
27 kg
60 Hz - 18 kHz
8 Ohms
1 x 4" Diaphragm
1.5" Exit Compression Driver
110° H - 10° V
Slidelock Rigging System
Alan B. ADAMSON "Sound Chambers and Waveguide“​


Compact Set
2 x 4 S10
2 x 2 S119
Performance Set
2 x 8 S10
2 x 4 S119
High Performance Set
2 x 12 S10
2 x 6 S119


S-Series Support Frame
S-Series Extended Beam
S-Series Moving Point Extended Beam
S10 Dolly
Dolly Stacking Legs
S10 Cover 4up
S10 Underhang - Suspends S10 enclosures from E-Series
S10 Flight Case


S10 Spec Sheet

Spec sheet for the S10

S-Series User Manual

User manual outlining proper use and safety precautions for the S-Series

S-Series Configuration Brochure

Document outlining the factory recommended configurations for the S-Series

3D Cad Drawings S Series

3D CAD drawings of all S-Series enclosures

Adamson Amplification Chart V5.3

Displays the maximum amount of Adamson loudspeakers that can be used with approved amplifiers

Adamson Load Library 5.4

Adamson’s updated preset library requires Lake Controller 7.0.0 or higher

BluePrint 1.3.3 (Windows)

Simulation Software for PC

BluePrint 1.3.3 (MAC)

Simulation Software for MAC